Product code: GRD5F4810
This premium electric bike kit system is for those that want the best of the best in performance, efficiency, weight, stealth and SPEED! There is a 300lb total load limit so if you plan on more than that, look to a heavy-duty system.
E-BikeKit™ Front 500w Geared Hub Motor Conversion Kit
with 48 Volt 10 Amp Hour (AH) Li-ion Battery Pack and 3 Amp Charger
The E-BikeKit 500-1000w geared conversion kit is powered by an internal 5:1 planetary gear hub motor with clutch. The clutch in the geared motor offers zero drag when pedaling and not engaging battery power. This motor is more efficient, resulting in increased range (especially with "start/stop" riding), has more starting torque, and has greater hill-climbing ability than a Direct-Drive motor of equal power rating. The motor is also smaller in diameter for increased stealth and 3.4lbs lighter than the 500w direct-drive.
Who's it for? This premium electric bike conversion kit system is for those that want the best of the best in performance, efficiency, weight, stealth and speed. Top speed is 28MPH! There is a 300lb total load limit so if you plan on more than that, look to a heavy-duty system.
Watts (Nominal/Peak): 500-1000w (EBK 22amp controller)
Top Speed: Approx. 28 MPH @48v in 26" wheel
Range: 12-26 Miles
Charge Time: 3hrs (0-100%)
Weight: 21lbs (9.5kgs)
Stealth Factor: High
Lithium batteries provide a high level of performance for the duration of each discharge (unlike seal lead-acid where performance is diminished 1:1 as the pack is emptied). Lithium batteries have a much higher power to weight ratio than lead-acid and 5-8 times the number of charge cycles (how many times a rechargeable battery can be charged from 0-100%). The lithium option costs more initially ,but over time, the "cost-per-cycle" is about half the cost of lead-acid. Lithium packs also require less care as they can be left partially charged, and do not require immediate charging after each use. All batteries MUST be properly cared for during storage.
Choosing Your Wheel Size: You can find your wheel size written on your tire. Available size options for this conversion kit are: 16", 20", 24", 26", 700c & 29er. Acceptable tire widths for the E-BikeKit rims: 1.15"(29mm) - 2.25"(57mm).
Front vs. Rear Wheel: We recommend rears for most conversions.
Brand: Electric Bike Technologies
Type: Internally Geared (brushless, disc brake compatible)
Power: 500w nominal / >750w@36v / >1000 @48v
Cable: 8" axle exit, 3-phase / 5 hall effect
Connector: Round 8-pin 13/32" (10.4mm)
Weight: 9.4lbs (4.26kg)
Warranty: 1 Year (up to 48v - 300lb max load)
Nominal Voltage: 48v
Nominal Capacity: 10.5Ah (C5)
Battery Energy: 504Wh (Approx.)
Dimensions: 6" (149mm) x 3" (69mm) x 19"(480mm) (Approx.)
Total Weight: <= 14lbs/6.5KG
Cell Assembly: 18650-3.2v-1500mAh-15S7P
Life Cycles: 100% DoD = 700 cycles / 80% Dod = 1500 cycles
Max. Continuous Discharge: 30A
BMS Protection Current: 30A
Discharge Cut-Off Voltage: 37.5v
Max. Charge Voltage: 54.6v
Inner Resistance: < 50mΩ
Charge Time: <= 4 hours
Operation Temperature Range: Charge: 0’C---45’C / Discharge: -20’C---65’C
Storage Temperature: 0’C---40’C (Extended Storage: 15’C-25’C;)
Battery Box Material: Aluminum
Assembled Pack Certificates: UL; UN38.3; MSDS; RoHS; SGS
Limited Warranty: 1 Year
Manufacturer: Electric Bike Technologies
**System includes battery carrying rear rack.
Every E-BikeKit conversion kit comes with all of the parts you'll need for your conversion.
1 x USA hand-built wheel w/ disc-brake compatible hub motor
1 x 36/48V compatible 22amp 12FET brushless motor controller
1 x LCD dashboard with on/off, battery indicator & 5-level top speed control
2 x Throttles (1 Thumb & 1 Split-Twist)
2 x E-Brake handles (left & right)
1 x Motor cable
1 x Accessory cable
1 x Battery wire harness (kits w/o batteries only)
1 x 7-Speed Shimano Freewheel (rears only)
1 x Owner's manual w/ installation guide
***Zip Ties, c-washers & torque arms in every kit!